Private indoor spa with a pool under a round skylight

Architecture and interior design of villas

A villa is built for decades, and the most expensive mistakes are made at the very start: the staircase in the wrong place, the master bedroom facing the afternoon sun, a spa zone added later where the plumbing was never planned. We design villas from the inside out, starting with how your family lives.

In short. We design villas from the inside out: brief and site analysis, functional programme, architectural concept as a BIM model, interiors, specifications and author supervision, with a wellness zone planned in from the first sketch.

What is included

01 / 07
01

Brief and site analysis

Plot, planning restrictions, sun, wind, views, access. Your family’s routine, guests, staff, cars.

02

Functional programme and zoning

How many rooms, what sizes, what sits next to what. Approved before drawings begin.

03

Architectural concept

Volumes, floor plans, façades, sections and landscape as a BIM model.

04

Interior design

Layouts, materials, lighting scenes, furniture and final visualisations.

05

Specifications

Finishes, furniture, lighting and wellness equipment with suppliers and budget.

06

Working documentation, if needed

Prepared for your contractor, who checks it against local codes.

07

Author supervision

Site visits and on-site decisions so that the villa is built as designed.

Construction is led by your contractor. We design, supervise and supply the wellness equipment.

12345

Wellness built in, not added later

Every villa we design has a dedicated space for wellbeing, from heat and cold therapy to a bedroom designed for deep sleep, with daylight where you want it and darkness where you need it. Built in from the first sketch, it costs a fraction of what a retrofit would.

  1. Sauna with proper ventilation
  2. Cold plunge with drainage and power ready
  3. Recovery room
  4. Daylight where it is needed and darkness where it is needed
  5. Bedroom designed for deep sleep
Design book

Wellness
Design & Device

 
  
  
  
  
  

What you get

  • Approved functional programme and zoning
  • BIM model, plans, façades and sections
  • Visualisations of the main interiors
  • Design book with materials and furniture
  • Specification with suppliers and budget
  • Author supervision reports during construction

Building wellness into a villa from day one

A sauna needs ventilation and a dedicated power line. A cold plunge needs drainage and a floor that can take the weight. A recovery room needs quiet and control over light. Planning all of this at the concept stage costs very little. Adding it after construction usually means tearing up finished floors and walls.

We position the wellness zone around your family's routine, the views, the path of the sun and the service areas. The result is a villa where heat, cold, water and rest flow along one considered route instead of being scattered around the house.

04

Frequently asked questions

Do you work outside Dubai?

Yes. We work across the UAE, in Qatar, Saudi Arabia and other countries. The concept stage is done remotely with site visits at key moments.

Can you work with my architect?

Yes. We can take the interiors and the wellness zone while your architect leads the building. We agree the split of responsibility at the start.

How long does a villa concept take?

Usually 6-10 weeks from the approved brief to the final presentation, depending on the area.

How is the price calculated?

By area and scope of work. Each stage is paid before it starts. After the brief you receive a fixed proposal.

Can you also supply wellness equipment?

Yes. We supply and install saunas, cold plunges and recovery equipment, including premium far-infrared, back-relaxation, pelvic-floor and movement technologies.

How early should I involve a wellness designer?

Before the architectural plans are final. The location, the drainage, the power capacity and the ventilation route are all cheapest to decide at the concept stage.

Can you design only the wellness zone of my villa?

Yes. We can design only the wellness zone: the sauna, the cold plunge, the recovery room and the power, water and ventilation they need, with drawings for your architect and contractor.

Do you supervise construction?

We offer author supervision: site visits, answers to the contractor's questions, control of materials and key details, and visit reports with photos. The building itself is led by your contractor.

Contact

Tell us about your project

Leave your contacts and a few words about the property. We will call you back within one business day.

Phone and WhatsApp+971 58 298 8080
Emailinfo@wellness-dd.com

Thank you. We will call you back within one business day.